BEKOMAT
The BEKOMAT is an intelligent, level-controlled drain that senses actual condensate and discharges it with zero compressed-air loss.
DISTRIBUTOR-FIRST SUPPLY PARTNER · SINCE 1999 BRAND · BEKO
Truth in Compressed Air
Reliable. Efficient. Innovative.
BEKO Technologies engineers and manufactures the components and engineered systems that turn raw compressor discharge into clean, dry, measured compressed air. The line is built around one idea the company calls "Truth in Compressed Air"; that air quality should be specified, treated, and proven to a standard, not assumed.
For more than four decades BEKO has developed, manufactured, and sold high-capacity, high-efficiency treatment products covering the whole air path: condensate drainage and oil-water separation, refrigeration, membrane and desiccant drying, coalescing and activated-carbon filtration, catalytic oil-free conversion, and the measurement instrumentation that proves the result. The technology is engineered in-house end to end, which is why a single BEKO train can carry an audit from drain to dew point on one brand.
SPC sources the BEKO line direct, so the spec you quote is the spec that ships; drain, dryer, filter, and instrument from one local partner who knows how they fit together.
BEKO treats the whole air path, and so do we.
Through the distribution network, BEKO availability and pricing are backed by aggregated demand across the network, with SPC as the single point of contact for quoting, lead time, and after-sale support.
The BEKOMAT is an intelligent, level-controlled drain that senses actual condensate and discharges it with zero compressed-air loss.
A timed solenoid drain for points where the simplest automatic discharge is enough, the economical rung below the zero-loss BEKOMAT.
QWIK-PURE separates oil from condensate at the source so treated water can go to drain as compliant wastewater.
CLEARPOINT activated-carbon is the oil-vapor polishing stage, the final step removing gaseous hydrocarbon and odor coalescing media cannot.
First-stage water separation ahead of dryers and filters when aftercooler or receiver discharge is wet.
Shared CLEARPOINT housing platform for particulate, coalescing, and high-pressure filter trains.
Final oil-vapor and odor removal stage for food, pharma, breathing-air, electronics, and paint air.
CLEARPOINT particulate / dust filters capture solid particles down the ISO 8573-1 class ladder, protecting downstream equipment.
CLEARPOINT water separators knock out bulk liquid water before it loads the dryer and filter train.
METPOINT OCV continuously measures oil-vapor content to 0.003 mg/m3, the proof layer behind an ISO 8573-1 Class 1 claim.
METPOINT dew-point sensors and monitors verify dryer performance continuously rather than on a spot check.
METPOINT flow sensors measure consumption and leakage so air cost and overloading are visible, not guessed.
Compact membrane drying catalog for point-of-use drops and OEM packages.
Lowest-capital desiccant drying tier for compact to mid-range flows and standard low-dew-point applications.
Large continuous-flow systems where reducing purge loss and operating cost is the main decision.
Engineered high-duty applications where zero-purge or heat-of-compression drying is the right economic tier; confirm current US program before quoting.
General plant-air drying with factory-installed BEKOMAT drain and the core RX model ladder.
RA CT and RA VSD energy-saving refrigerated dryer variants.
Breaks hydrocarbons down in the air stream for oil-free, sterile air below 0.003 mg/m³.
Food & Beverage Processing → Clean, oil-free, low-dew-point air in contact with product and packaging. 
Pharmaceutical, Medical Device & Laboratory → ISO 8573-1 Class 1 / Class 0 air with documented, monitored quality. 
Automotive Manufacturing → Dry, particle-free air for paint, robotics, and pneumatic tooling. 
Metalworking & Fabrication → Reliable drying and condensate control for machining and finishing. 
Electronics & Semiconductor → Ultra-clean, dry air where moisture or oil contaminates the process. 
Chemical & Petrochemical → High-pressure filtration and drying with stainless options. Around +37°F for general plant air points to a DRYPOINT RX/RA refrigeration dryer. -40°F or lower for instrument and process air calls for a DRYPOINT XC desiccant dryer. Compact point-of-use drops go to a maintenance-free DRYPOINT MD membrane dryer.
Match flow and pressure to the family envelope; CLEARPOINT filtration spans 25 to 21,000 scfm and to 7,250 psig on the HP series; BEKOMAT drains cover 100 to 50,000 scfm and to 912 psig on the high-pressure line.
Target the ISO 8573-1 class. Class 1 particle and oil is a full CLEARPOINT train (particulate to coalescing to carbon). A guaranteed oil-free result below 0.003 mg/m³ steps up to the BEKOKAT catalytic converter.
Yes; the level-controlled BEKOMAT is the long-life zero-air-loss choice. For oily condensate going to drain, add a QWIK-PURE separator sized to the lubricant type.
Tell us the spec and the account and we will come back with the right line, sourced through the distribution network.
Your quote. We reply within one business day with pricing, lead-time, and configured parts.
