DISTRIBUTOR-FIRST SUPPLY PARTNER · SINCE 1999 Live · Compressed Air System
SPC Company
Compressed Air / Service / MRO / Desiccants / Deliquescent Desiccant Tablets
Layer 08 · Service / MRO Value · Van Air Systems
What it is

Deliquescent Desiccant Tablets

Compare tiers ↓

Deliquescent tablets are the drying media in a single-tower deliquescent dryer. They absorb water vapor, slowly dissolve into a brine that drains away, and use no energy¹. The bed is consumed in use and gets refilled.

Real-world reference Representative deliquescent desiccant tablets
Product type Deliquescent Desiccant Tablets
Why it's needed

Why this matters.

A deliquescent dryer has no power, no valves, and no controller. The tablets are the whole drying process. When the bed runs low, the air goes through wet.

The maker's rule is simple: add tablets when the top of the bed drops to the sight window, and check it monthly⁴. The dryer also has to be drained every 4 to 8 hours of operation if it has no automatic drain⁴. Use the dryer maker's tablets; one maker states that any other material voids the warranty⁴.

Deliquescent drying gives suppression below inlet temperature, not a fixed low dew point. If the customer needs -40°F, that is a regenerative dryer with alumina, not more tablets.

Technologies within this type

Which technology — and when to choose it.

The tablet sets the dew point. Use the type the dryer maker lists for the application.

Standard tablet

About 20°F below inlet temperature¹. The general compressed air charge.

Higher-suppression tablet

Up to 45.7°F of suppression³ where the application needs a lower dew point.

Key selection criteria

What we need to spec it right.

From the machine spec sheet to the part number. Answer what you know, leave the rest blank, and send.

Answer what you know, leave the rest blank, and send. Need different sizes, colors, or quantities? Configure, add to quote, then configure again. Each click is one quote line.

04Choose your priority  ·  core differentiator

Whatever your lever — performance, value, or price — SPC has the right brand.

Pick the priority; the quote desk handles the cross-reference.

02 Value 1 brand
Where it's used

Industries served.

Each industry below uses this product across the listed areas. Open an industry to see how it fits the rest of its system.

Also applies to Remote and off-grid sites · Portable blasting and painting rigs · Natural gas and field service

Troubleshoot · top failures

Most returns trace to one of these causes.

Symptom
Most likely cause
Fix
Wet air downstream.
Bed below the sight window⁴.
Refill to the maximum level and set a reorder schedule.
Brine carryover or water in the outlet line.
Sump not drained every 4 to 8 hours⁴.
Drain on schedule or add an automatic drain rated for brine.
Dew point higher than expected.
Hot inlet air; suppression is measured from inlet temperature¹.
Cool the inlet with an aftercooler, or check whether a higher-suppression tablet fits³.

Get the right deliquescent desiccant tablets on quote in 24 hours.

Send us the application — a specialist routes you to the correct tier with a configured part. Lead-times and pricing returned within one business day.

Open quote engine ↑

Sources

  1. Van Air Systems, Dry-O-Lite Desiccant Tablets product page: dissolves into brine using no energy, about 20°F below inlet temperature.
  2. Van Air Systems, Single Tower Deliquescent dryer product page: bottom-up flow, 80°F inlet gives about 60°F dew point, suppression range 20°F to 63°F.
  3. Van Air Systems, Super Dry-O-Lite Desiccant Tablets product page: dew point suppression up to 45.7°F.
  4. Van Air Systems, D12 to D36 deliquescent dryer user manual: add tablets at the sight window, monthly bed check until consumption is known (average one-shift example 1 to 3 refills a year, section 3.2-B p6), drain every 4 to 8 hours, use maker desiccant only.