DISTRIBUTOR-FIRST SUPPLY PARTNER · SINCE 1999 Live · Compressed Air System
SPC Company
Compressed Air / Service / MRO / Desiccants / Molecular Sieve Desiccant
Layer 08 · Service / MRO Value · Van Air Systems
What it is

Molecular Sieve Desiccant

Compare tiers ↓

Molecular sieve is a sodium aluminosilicate bead with a fixed pore size set by its grade. The maker lists the 4 angstrom grade for air and gas drying¹.

Real-world reference Representative molecular sieve desiccant
Product type Molecular Sieve Desiccant
Why it's needed

Why this matters.

Some specs go past what a standard -40°F bed is meant to hold: process gas, lab air, cold outdoor runs, and specialty manufacturing. Molecular sieve is the media for that work, in a dryer designed to use it¹.

Switching an alumina dryer to sieve is a dryer question, not a media question. Purge, cycle time, and bed design all set the dew point. Confirm with the dryer maker before changing the fill.

Key selection criteria

What we need to spec it right.

From the machine spec sheet to the part number. Answer what you know, leave the rest blank, and send.

Answer what you know, leave the rest blank, and send. Need different sizes, colors, or quantities? Configure, add to quote, then configure again. Each click is one quote line.

04Choose your priority  ·  core differentiator

Whatever your lever — performance, value, or price — SPC has the right brand.

Pick the priority; the quote desk handles the cross-reference.

02 Value 1 brand
Where it's used

Industries served.

Each industry below uses this product across the listed areas. Open an industry to see how it fits the rest of its system.

Also applies to Process gas and purification · Laboratories · Specialty manufacturing

Troubleshoot · top failures

Most returns trace to one of these causes.

Symptom
Most likely cause
Fix
Dew point never reaches the -100°F spec.
Dryer not designed for sieve, or wet inlet beyond its rating.
Check the dryer rating and inlet conditions with the maker before recharging.
Dew point drifts up over time.
Bed saturated or contaminated with oil².
Replace the bed and the prefilter element; a lubricant-fouled bed must be replaced².

Get the right molecular sieve desiccant on quote in 24 hours.

Send us the application — a specialist routes you to the correct tier with a configured part. Lead-times and pricing returned within one business day.

Open quote engine ↑

Sources

  1. Van Air Systems, Molecular Sieve product page: 4 angstrom grade, -100°F pressure dew point by dryer design, higher cost limits use to special process applications.
  2. Van Air Systems, HL-200 to HL-2000 Heatless Regenerative Dryer manual (P/N 32-0263-F): alumina bed replacement example of 24 to 60 months (2 to 5 years) at its stated inlet conditions, not a universal sieve interval, and replaced once contaminated with lubricant.