Desiccant is what pulls water vapor out of the air inside the dryer. The dryer is the vessel and the valves; the desiccant does the work.
Desiccant is the consumable inside the dryer. There are two kinds and they are not interchangeable: regenerative beads (activated alumina, molecular sieve, silica gel) that dry, regenerate, and last for years on the dryer maker's schedule, and deliquescent tablets that dissolve as they work and get refilled. Find the dryer type, the fill weight, and the dew point, and the quote is simple.
Tap any type to jump to its page. The Decision Guide further down asks up to two questions (two options to start) that funnel the spec to one of these.
Desiccant is what pulls water vapor out of the air inside the dryer. The dryer is the vessel and the valves; the desiccant does the work.
Activated alumina, molecular sieve, silica gel. Beads that adsorb water and regenerate in a twin-tower dryer. Changed out on the dryer maker's schedule (the Van Air HL example is 24 to 60 months at its stated inlet conditions)⁴.
Tablets that dissolve as they dry. Single-tower, no power. About 20°F of dew point suppression with standard tablets⁵. Refilled when the bed reaches the sight window; the Van Air D12 to D36 manual's one-shift example is 1 to 3 refills a year⁶.
A saturated or oil-fouled bed lets water through to every tool and instrument downstream. Once regenerative desiccant is contaminated with lubricant, it has to be replaced⁴.
Regenerative beads do not go in a deliquescent tower, and tablets do not go in a twin-tower dryer. The maker's manual names the media and the fill weight per tower.
With the dryer make and model, the pounds per tower, and the dew point target, SPC Company can quote the right media without a callback.
Adsorbent beads for twin-tower heatless, heated, and blower-purge dryers. The bed dries, regenerates, and lasts years on the dryer maker's schedule.
Tablets for single-tower, no-power dryers. The bed dissolves as it works and is refilled on a schedule.
Distributor-facing reading. The trade-off column is the one that closes the loop — every type buys something and gives something up. Knowing what each type costs you is how the right one gets on the quote without a callback.
Price band is a relative cost tier between the four types, not a price. SPC Company quotes every desiccant order. Fill weights and bead sizes come from the dryer maker's manual; when in doubt, send the nameplate.
Draw a line from the customer's answer at the top to the type name at the bottom. This is the page distributors screenshot and send to a customer the day before a quote call — so the customer comes prepared with the answers, and the call is about the brand and the budget, not the basics.
If the customer does not know the dryer type, ask for a nameplate photo. Two towers that swap back and forth is regenerative. One tower with a sight window and a brine drain is deliquescent.
Ask for the nameplate and the pounds per tower. The rest of the quote follows from those two answers.
Service / MRO is where repeat orders live. Desiccant is one of the clearest examples: every twin-tower dryer needs a full recharge on the maker's schedule, and every deliquescent dryer eats its tablets and needs refills as consumption dictates. Quote the media with the filters and the drain on the same visit and the dryer keeps doing its job.
Oils, filters, separators, service valves, and OEM cross-reference items.
→Hose, reels, drains, and the utility parts around the installed system.
→Regenerative beads and deliquescent tablets for the dryer you already own.
The desiccant and deliquescent dryers this media goes into.
→Tell us the end-use, the rough flow, and what climate the unit would sit in. We'll come back with a configured quote — the right type, the right tier, and the upstream gear the warranty assumes.
Start with the family, then add the quote inputs you know. Unknown specs stay open for SPC to confirm.
Your quote. We reply within one business day with pricing, lead-time, and configured parts.